If it is and you're afraid to go it alone, check out ifixit for more guides. NOTE: your computer may be slightly different. And that's it! Everything unscrewed and removed! Now let's put it back together again. Remove the four posts on the side of the hard drive with the T6 screwdriver. MacBook Pro 13' Unibody (Model A1278 Early 2011 Late 20) SATA SuperDrive Cable 9.99 Buy Tools Phillips 00 Screwdriver 5.49 Buy Spudger 3.99 Buy Show more Step 1 Lower Case Remove the following ten screws: Three 14.4 mm Phillips 00 screws Three 3.5 mm Phillips 00 screws Four 3. Remove those and you'll be able to lift up the hard drive and unplug it. It's being held in place by 4 more screws. With the panel removed you can see the hard drive. Be sure to place them somewhere safe so they don't roll away into oblivion. Use the #00 screwdriver to remove all the screws on the back. So shut down your laptop and flip it over. But since you've already gotten this far you're probably both inclined to get it done AND have a machine past warranty anyway. Opening up your MacBook Pro opens you to the possibility of messing something up and voiding your warranty so if that bothers you you can just sit tight with what you have. Thanks for watching.Here's your last chance to bail. If you want to learn how to replace the hard drive in a different system please let us know which one of the comments below. And finally, remove the four T6 Torx retaining posts. The screws remain attached to the hard drive bracket. Loosen the two Phillips screws holding the hard drive bracket and remove the bracket. 5700 xt sapphire, 3000 series gpu, gtx 1080 motherboard. Once removed bend the battery cable up slightly so it doesn't accidentally reconnect. Buy the new arrival of replace hard drive macbook pro mid 2012, up to 60 off, Only 2 Days.

For your safety it's best to disconnect the battery before proceeding.

This old-style hard drive is the bottleneck of your Mac. When the screws are removed use your fingers to pry open the case near the vent. The 2008-2012 MacBook Pro with a non-retina screen came with a conventional spinning hard drive. Seven 3 1/2 millimeter phillipsĪnd three 14 millimeter phillips. There are 10 screws on the bottom to remove.

Before starting you may need to clone your data first. Share with a pal whoâ€™s new to all this! | By Kingston Technology | Facebook | This guide will walk you through removing the hard drive in your 2009 to 2012 Macbook Pro. How to replace the Hard Drive in a Macbook Pro (2009-2012) | For all our 2009-2012 Macbook Pro friends: Hereâ€™s a special tutorial on how to upgrade your hard drive to an SSD.

Replace hdd macbook pro 2012